Dalam video ini saya mencoba memberikan beberapa tips untuk secara khusus meningkatkan kualitas permukaan luar cetakan 3D Anda. Lihat sponsor meja berdiri bermotor yang mengagumkan – FlexiSpot! Kunjungi situs mereka (afiliasi): FlexiSpot Adjustable Standing Desk Pro Series Dapatkan DISKON $15 saat menggunakan kode kupon: FSCODE15 Stempel Waktu: Intro – 00:00 Sponsor – 00:43 Kipas Pendingin – 2:28 Dinding Luar Lambat – 4:55 Kecepatan Perjalanan – 6:00 Ganti Nozel – 7:46 Harness Hotend Tight – 9:16 Kencangkan Sabuk Anda – 10:24 Hapus Z-Hop – 11:29 2022 Pembaruan Buku – 12:56 Musik latar oleh Joakim Karud Tujuan saya PLA adalah Polymaker PLA Pro. Tidak hanya mudah dicetak, tetapi juga sangat kuat. Bukan sponsor berbayar – Saya suka menggunakannya! Ikuti sekarang untuk mendapatkan lebih banyak hadiah gratis dan tutorial pencetakan 3D! Kunjungi untuk produk yang pernah saya gunakan dan setujui. Anda juga dapat mereproduksi pencetakan 3D dan mendukung saluran melalui Toko Merchandise saya: bit.ly/2GidwfQ Raih Edisi 2022 buku Kegagalan Pencetakan 3D saya: Beli dengan diskon di Patreon saya: .
source
Wow.. the subtitles are just…
Shakespeare? Are ye nigh?
I dont have a 3D printer
Thank you General!
Some great tips there but just one thing.
NO COOLING FOR ABS. Not an absolute rule, but in general, using any fan at all greatly increases the risk of contraction, warping, and delamination. Instead of using a fan, simply slow down the printing speed. This way, the ABS spends more time above it's glass transition temperature after being extruded, and this reduces warping as well as reducing the risk of delamination. Similarly, printing ABS at the highest temperature you can, without causing too much stringing, will again help to prevent warping and delamination.
Hope these ABS tips help someone. It took me a while to learn these lessons!
nice nod to DD with those fgc uhhh books
IT WAS THE DANG Z HOP! Thanks 🙂
IT WAS THE DANG Z HOP! Thanks 🙂
The slicer that came with my ender 3 only has so many options. Yours seemed to be much more detailed and has more control. What slicer do you use?
wht hell happened to subtitles?
Thank you so much for the hints and tips! I have a entry level machine and by just adjusting the movement time and the Z-jump, I printed much higher quality in a way less amount of time. My latest print was initially a 7 hour print and after adjust just the 2 settings I already saw my time come down to 5 hours.
Next up will be the fan and then trying outer wall settings!!!
Keep up the great work!!!
Bloody hell. I know it’s sponsored but this desk is awesome.
is tsh settings working with jg maker artist d pro ? cuz i have a big problem the support not sticking well idk why
I have come to the conclusion i just suck at 3d printing… i have a brand new CR5 pro high temp and never has worked great for me. Sucks oh well
Always like your videos
I think a lot of what determines print quality is how well the printer is put together. When I was putting mine together, I remember watching a setup tutorial on YouTube where the guy explained how you want to make sure all the bars and everything are leveled and showing equal distances from each other at the top and at the bottom before tightly screwing things in place. I think just making sure everything is as perfectly symmetrical and exactly where parts need to be is greatly important. I feel like I was lucky to have ran across that video when putting my printer together because it helped me catch some of those small details I would've never thought of, and honestly think because of those, my print quality has been extremely good, especially considering I almost hardly change any of the settings from default in cura.
FCG-9 here I come
What slicer do you use?
Bro this actually worked it looks like a mold now to string FAST and no glue needed to stick No print lines Thank you.
I need that desk
what software are you using to edti these settings? I have an ender 3 and I don't know how to get those. Also, how do you make them apply to the machine, is it by SD?
Properly calibrated pressure advance and Input shaper on klipper firmware makes wonderful quality prints at high speeds. Currently printing at 150mm/s print speed and 7k acceleration with zero defects on a benchy! A note to add klipper may not be for everyone as it can be challenging to setup but once setup the countless hours spent fine tuning the printer will be well worth it!
Thank you for a video, vet useful information for beginner <3
OMG, you might have just cracked the layer inconsistency issue for me (I'm using "lift z", which I rarely did before, don't know why I have it), fingers crossed, I'll test now 😀
Video starts at 2:30
OMG ! Thank you, it is the first time I heard about z hop ! I used it all the time on my ender 3 since I saw it dragged sometime on the print but have worse layer since then. I will happily deactivate it and go back to good print. ❤
Also, I want your book
3:37 can i use a regular fan outside the printer blowing straight at it? 😛
My bace exelerations are in the 3 to 5 thousand is this ok? I have a magician x
Thanks for sharing! All great info, I also had seen the Z hop delete video. I have reduced the Z hop to 0.02 And slow down retraction as per another video. It made things better.